Sikaplan PVC seam sealant 1 liter

• Depending on the wind and ambient humidity, the seam sealant will be fully cured after approximately 7 days.
• dries quickly, forming a film.
• It bonds homogeneously with PVC sealing membranes.
• long service life

• dries quickly to form a film
• combines homogeneously with PVC roofing and sealing membranes
• long service life

Step-by-step instructions:
1. Perform seam testing according to the Sikaplan® installation instructions.
2. Apply Sikaplan® Seam Sealant Type S with PE spray bottle (strand approx. 3-4mm) to clean seam edge as a sealant (consumption approx. 30g/m).
3. The seam area must not be subjected to stress until the sealant has hardened.
4. Any accidentally spilled PVC solution should be removed immediately with a cloth.
5. Tool cleaning: Tools and aids must be cleaned with Sikaplan® Cleaner L 100 immediately after use.

Processing Instructions Sikaplan

Product Data Sheet Sika Swelling Agent

Safety Data Sheet Sikaplan WP Seam Sealant

Sika Processing Instructions and System Manual

Processing Instructions Sikaplan PVC

System Manual Sika Pond Liner PVC

Labeling (REGULATION (EC) No. 1272/2008)
Signal word : Danger

Hazard statements :
H225 Highly flammable liquid and vapor.
H302 Harmful if swallowed.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.

Precautionary statements : Prevention:
P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks,
open flames, and other ignition sources. No smoking.
P233 Keep container tightly closed.
P261 Avoid breathing mist or vapor.
P280 Wear protective gloves/protective clothing/eye
protection/face protection.

Response:
P370 + P378 In case of fire: Use dry sand, extinguishing powder, or
alcohol-resistant foam to extinguish.