Zettex X50 Spray Adhesive for Insulation Materials

⏱️ Quickly done on the construction site:Save valuable working time through extremely fast processing. The panels adhere immediately, eliminating the need for tedious re-fixing.

🛡️ No material corrosion:Protect your insulation boards from chemical damage. The formula is specially developed to leave EPS, XPS and PU completely unharmed.

♾️ Rock solid for eternity:Rely on a perfect end result. The enormous adhesive strength ensures an extremely strong and permanent bond that never gives way.

🛠️ Immediately ready for use without heavy equipment:Save yourself tedious mixing or expensive accessories. Simply shake the handy 500 ml can, spray and start precisely right away.

🏗️ One adhesive for almost every substrate:Make your life easier, because X50 adheres to a wide variety of surfaces and covers almost every insulation application in construction.

The materials to be bonded must be dry, dust-free, and grease-free. Then carefully spray the contact adhesive
onto both surfaces to be bonded. An ideal distance is 30 cm between the substrate and the
spray gun. Preferably apply the adhesive strips without overlapping. After4-6 minutes adhere both
substrates together and press firmly or roll them on. If spraying with overlap, allow at least
double the open time. For very porous substrates, check whether there is sufficient contact between
the two adhesive layers. If necessary, apply an additional layer.

Safety Data Sheet

Technical Data Sheet

Signal word Danger
Hazard statements H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
1/16
Page: 1/16
Print date: 08-07-2024 revised on: 22-10-2024
SAFETY DATA SHEET
Spraybond X50 aerosol
according to (EU) 2015/830
Version number 2
Date of change: 10.10.2023 Change: 2.2 Replaces date: 08.02.2021
Zettex X50 Aerosol
Safety instructions P210 Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P261 Avoid breathing vapour/aerosol.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with national regulations.
Additional information on
labeling
EUH066 Repeated exposure may cause skin dryness or cracking.
Contains PENTANE, ACETONE
Additional
safety instructions
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312 Call a POISON CENTER/doctor if you feel unwell.
P391 Collect spillage